Cement & Mortar
Measurement of length changes
Moulds, gauges studs and length comparator are used to measure length changes due to shrinkage or expansion according to the main International Standards ASTM C490, C151, C157, C596, EN 12617-4, UNI 6687, EN 12808-4 and EN 1770. For measuring expansion due to Alkali-Silica reaction, please consult the dedicated section
Two Gang Prism Mould 25x25x285 mm to ASTM
This mould is used for the Expansion of Portland cement
Autoclave, High Pressure
The autoclave consists of a high-pressure steam vessel for cement expansion tests.
Hydraulic Shrinkage Mould 40x40x160 mm
The 62-L0009/G version is used for the determination of linear shrinkage of cement mortars.
Length Comparator
Is used for a number of length measurements concerning mainly cement and mortar specimens
Three Gang Moulds 40x40x160 mm, EN 196-1
Used to produce the mortar specimens for compression and flexural tests.